title scale date dr dwg rev the information contained in this document is proprietary to e-switch and is not to be copied or transferred sheet of rev pcr no description date by 100DP1T1B1M1QEH 2:1 9/21/2011 st121005 b bgl 1 1 without locing ring with locking ring panel mounting 1 2 3 36 b 20170 revised and redrawn 9/21/11 bgl note: 1. all dimensions in mm [inch] 2. general tolerance: x.x=0.4 x.xx=0.25 3. terminal numbers for ref only 4. contact material: silver 5. contcat rating: 2a @ 250vac, 5a @ 120vac or 28 vdc 6. electric life: 40,000 make-and-break cycles at full load. 7. contact resistance: 10m max. initial @ 2-4vdc 8. insulation resistance: 1,000 m min. 9. dielectric strength: 1,000 v rms @sea level. 10. operating temp.: -30c to 85c 11. denotes critical parameter. 12. 2002/95/ec (rohs) compliant 13. hardware to be supplied bulk: t100011 - lock washer qty - 1 t100015 - lock ring qty - 1 t100000 - hex nut qty - 2 pos. 1 pos. 2 pos. 3 switch function none on on 2-3, 5-6 n/a 2-1, 5-4 2 13 circuit: dpdt e-switch marking on opposite side 8.89 [.350 in] 12.70 [.500 in] 11.43 [.450 in] 3.96 [.156 in] 5 46 25 ~ pos. 1 pos. 3 2.03 [.080 in] 4.83 [.190 in] .76 [.030 in] 4.70 [.185 in] epoxy seal 8.89 [.350 in] 1/4-40 uns - 2a 10.41 [.410 in] 1.52 [.060 in] keyway 2.92 [.115 in] n .71 [.028 in] 1.02 [.040 in] .85 [.033 in] .55 [.022 in] n 6.35 [.250 in] n 6.35 [.250 in] n 2.38 [.094 in] 6.10 [.240 in]
|
